As product performance improves, printed circuit boards continue to evolve. Traces are getting denser, more components need to be placed, yet board sizes are not growing—they are shrinking. Drilling holes in such tight spaces demands specialized techniques.
There are multiple PCB drilling technologies. In the traditional method for creating inner-layer blind vias, two double-sided boards with through holes are used as outer layers and laminated with a hole-free inner layer. This produces blind vias filled with resin, while blind vias on the outer layers are created by mechanical drilling. However, mechanical blind via drilling has drawbacks: setting the drill depth is difficult, the conical hole bottom affects copper plating, and the process for inner-layer blind vias is lengthy and costly. As a result, the traditional approach is becoming less suitable.
Today's common PCB microvia technologies include mechanical drilling, photoimaging, laser drilling, plasma etching, and chemical etching, in addition to the previously discussed carbon dioxide and laser drilling methods.
Mechanical Drilling
Mechanical drilling is a high-speed machining process. The drill bit is the key component, typically made of tungsten-cobalt alloy. This alloy uses tungsten carbide powder as the matrix and cobalt as the binder, sintered at high temperature and pressure. It offers high hardness and wear resistance, allowing it to drill the required holes smoothly.
Laser Drilling
Laser drilling uses carbon dioxide or ultraviolet lasers for cutting. A gas or light beam with intense thermal energy burns through the copper foil to create the needed holes. The principle is similar to cutting, with the beam being controlled precisely.
Plasma Etching
Plasma consists of particles with relatively large spacing that collide randomly and continuously. Its thermal motion is similar to that of ordinary gas. Plasma etching is mainly used for PCBs with resin and copper layers. Oxygen-containing gas is used as plasma; when it contacts copper, an oxidation reaction occurs, removing resin material to form holes.
Chemical Etching
As previously discussed, chemical cleaning can remove residues that ordinary methods cannot. Similarly, drilling can be achieved by applying chemicals to the desired locations, dissolving copper foil and resin to form holes.
Each method has its own advantages and limitations. Mechanical drilling is cost-effective for larger vias but struggles with microvias. Laser drilling offers precision and is suitable for blind vias and microvias. Plasma etching is effective for resin removal but requires specific gas mixtures. Chemical etching is simple but may lack control over hole geometry.
What this means for your build
- Choose the right via technology early: Work with your fabricator to select a microvia method that matches your density, aspect ratio, and reliability requirements.
- Account for process tolerances: Mechanical drilling has depth control challenges; laser and plasma methods have their own tolerances. Design with appropriate annular rings and clearances.
- Consider material compatibility: Plasma etching is effective for resin-rich areas, while chemical etching may affect multiple materials. Ensure your stackup is compatible.
- Plan for inspection: Microvias require cross-section analysis and X-ray inspection to verify plating thickness and hole quality. Include these in your quality plan.
- Leverage DFM feedback: Early DFM review can highlight via technologies that reduce cost and lead time while meeting performance goals.
Source: compiled from public web sources.